Floats & Race-E

Race-E kit B-314  with Flash Floats kit B-309

Designed by Harry Stewart, the Race-E is an aerobatic Park flyer with a wing loading in the 6 oz. per sq. ft. range with a 40 1/2" wingspan and 242 sq.in. of area. The tapered wing and classic tail shape give the Race-E a great look in the air. The assembly instructions address brushed  power options ( no longer avbailable)  and brushless for pure vertical performance. We recommend the HiMaxx 2808 brushless (M-110) and 18 amp Thunderbird speed control (C-M-110). The Race-E is not a 3D airplane, but is an excellent sport aerobatic design, and I have to say is the best flying, most fun model in our personal fleet. With the Flash Floats (B-309) the Race-E taks on the appearance of a Snyder Cup Racer (F-314).

22 1/2" long, with a calculated displacement of 16 oz. these floats work will on models up to 14 oz. Originally designed by Harry Stewart for the Electric Flash, these floats have been engineered with a complete hardware pack to mate with most any model with a fixed "tail drager" landing gear.  Design allows the floats to be attached to the models fixed landing gear in front with an adjustable rear support, alowing change over form land to water and back in minutes. It's reported that these floats also work well on snow.  Check out  radio-controled / Floating-Flyers  on our home page for models we have flown with these floats.  

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: