-
Perigee .56
$122.00The Perigee was designed by Tom Brett and flown to become world champion in 1962. One feature of the Perigee was that it was a little […]
-
Perky-Jr
$36.00The original Design was published in the October, 1952 issue of Air Trails, by OLD-TIMER. The article indicated the Perky was intended to fulfill requests from […]
-
Polyspan
$22.00Polyspan is a light weight, yet very strong, puncture resistant non-woven fiber with the appearance of silkspan. It is heat shrinkable for a tight covering job. […]
-
Profile Nobler
$140.00The Nobler, originally designed by George Aldrich in 1950, was introduced in the 1952 May and June issues of Model Airplane News. The Nobler was said […]
-
Race-E
$77.00Designed by Harry Stewart, the Race-E is an aerobatic Park Flyer with a wing loading in the 6 oz. per sq. ft. range with a 40 […]
-
Rambler
$27.50An Old Timer Gas Free Flight designed by Gilbert Sherman and published in the September 1939 issue of Flying Aces Magazine. The original 68" span model […]
-
Rambler-30
$55.50Gilbert Shurman designed the Rambler Gasoliner in 1938. It’s first contest was in Philadelphia where it placed 1st with a 22 min. flight on a 19 […]
-
Ranger 21
$38.00Ranger 21 was designed in 1957 by Carl Goldberg and produced as a kit until the late 1970s. It was intended to help new modelers achieve […]
-
Ranger 30 FF-CL
$62.00Along with Paul Bradley, BMJR has continued the line of Replica Free Flight Models originally designed and manufactured by Carl Goldberg Models in 1958. With a […]
-
Ranger 30 RC
$69.00In 1958, Carl Goldberg introduced the Ranger 30 to the modeling community through his Carl Goldberg Models Company. With a 30″ wingspan and all sheet […]
-
Ranger-28
$48.00Carl Goldberg did a great job designing this rubber powered sport free flight model. This model is a hybrid with features of the sheet balsa models […]
-
RAVEN 450
$121.00The Raven design was started in 2015 by Dave Platt; as a high thrust model. During the following 4 years, Dave built 12 Raven in sizes […]
-
Reisler R.3
$26.50The Reisler R.III was built by the Reisler Brothers in Berlin in 1922 under the company name of Stahlwerk. The plane featured a low aspect ratio […]
-
Satellite 320
$83.00‘ On May 8, 1975, Bill and Bob Hunter released the Satellite 320 GLH as part of the series 75 line of winning free flight designs. […]
-
Satellite Super D
$274.00The Satellite Super D is based on the Satellite 1300, originally designed by Bob Hunter in 1959 and upgraded to the series 70 in 1970. The […]
-
Satellite-E-36
$67.00It has been often said, “there is just something about the Satellite series of power models. They are beautiful on the ground and in the air. […]
-
Satin Doll
$117.00The Satin Doll was designed by Dave Platt in 1995 as a free flight rubber model to be flown at Old Warden in England. Model was […]
-
SCOUT
$72.00The BMJR Scout was developed from a hand drawn plan from Joe dated 1996. When it was announced 1/2A Stunt was to be flown at the […]
-
Shocer
$78.00The 1/2A Shocer, designed by Mel Schmidt, was selected for NFFS one-design competition in 2019. The BMJR kit was developed from a pdf file provided by […]
-
Simplex-30-FF
$56.00The Simplex was designed by Paul Plecan and published in the February 1941 issue of Air Trails magazine. Paul reported that his original model was lost […]
-
Simplex-30-RC
$58.00The Simplex was designed by Paul Plecan and published in the February 1941 issue of Air Trails magazine. Paul reported that his original model was lost […]
-
Simplex-45
$79.50The Simplex was designed by Paul Plecan and published in the February 1941 issue of Air Trails magazine. Paul reported that his original model was lost […]
-
Sioux
$74.00The Sioux was designed by Joe Wagner in 1949 as a foolproof 1/2A free flight and incorporated several features that provided automatic stability in flight. In […]
-
Sky Demon
$28.50The Sky Demon Electro-Sport is a very simple easily built and trimmodel that is a good choice for a first electric Free Flight. Originally powered by […]
-
Sky Demon – E-20
$23.00The Sky Demon is truly a stick and tissue modelers model. The original Sky Demon designed by Tim Bucher was published in the “stick and tissue […]
-
SkyScraper Double Kit
$76.00SkyScraper was originally a Scientific Model kit from 1940, updated in 1994, for Flying Aces Embryo event. BMJR kit contains instructions and parts to build both […]
-
Skyscraper S-40
$136.00Some models just catch your attention and they need to be built. Looking thru some past issues of Flying ACES; the Sky-Scraper caught my eye. I […]
-
Slim Zeek
$98.00The Slim Zeek designed by Dan Sobala is an approved Nostalgia design that also qualifies for the new Vintage FAI event. In 1955 Dan flew his […]
-
SMARTY
$58.00NFFS 2018 one-design for early 1/2A along with STREAK, B-130 History of the SMARTY has been scarce. We know from the original plan, the model was […]
-
SNARK
$81.5035″ rubber powered sport free flight. Design by Dave Platt. All up flying weight with 8 strand of 1/8 rubber 108 grams. Kit is complete except […]
-
Sniffer
$54.75The Sniffer is an early Post War model designed for the new OK Cub or Anderson Spitfire small glow engines. It is reported that the name […]
-
Sniffer-PF
$64.50The Sniffer-PF (for Park Flyer) is the same as the original free flight design with an instruction Addendum by Harry Stewart, and a complete hardware package […]
-
Space Rod
$78.00Designed in 1957 by Vic Cunnyngham the Space-Rod evolved from Sal Tabibi’s Spacer and Ron St.Jean’s Ramrod. The design inherited the best qualities of both models […]
-
Spacewalker
$123.00The Spacewalker was designed in the early 1980’s as a home-built aircraft in Hendersonville, NC by Jessie Anglin, intended to capture the essence of a 1930’s […]
-
Sparks
$53.00The Sparks is an intro-level design by Rex Hinson for the new E-36 class model, which was first flown at the 2007 Nats as a provisional […]
- Order By Phone:
- 321-537-1159
